- 1
Application
MG800/2040-WD serial coal shearer can be used mining thick coal seam,whose height is 2.9-4.5m
Performance and characteristic
Used in 2.9-5.4m coal seam mining.
Powerful enough to produce 500T coal each year.
Speed changer is loaded on the machine,walk on the trail.
Auto monitor on working condition and shown in Chinese.
Complete exam, protection and memory function.
Can be connected by USB
Can be operated both manual and remote.
Safety degree is raised.
Both roller can be operated at the same time.
All parts are connected by high-strength bolt.
High working rate, can cut through hard coal seam and thick easily.
Parameter
|
Model |
MG800/2040-WD |
MG800/1880-WD |
|
Cutting height range( m) |
2.9~5.4(Ø2.7Roller) |
|
|
Cut depth(m) |
0.865 |
|
|
Adapt dip angle Coal bed pitch(°) |
≤12 |
|
|
Roll drum diameter (m) |
Ø2.5; Ø2.7 |
|
|
Roll drum diameter (r/min) |
26.179 |
|
|
Length of rocker (mm) |
2947.5 |
|
|
Rocker arm swinging angle (mm) |
8480 |
|
|
Traction force(kN) |
1250/785; 1040/656; 865/545 |
|
|
Traction speed (m/min) |
0~10; 0~12; 0~14.5 |
|
|
Traction mode |
Electric traction (AC) without chain |
|
|
Machine height (mm) |
2202(without top guard board) |
|
|
Minimum dinting capacity (mm) |
580(Ø2.7Roller) |
|
|
Dust suppression mode |
Inside and outside spraying |
|
|
Installed power (KW) |
2×800+2×120+160+40 |
2×800+2×120+40 |
|
Voltage (V) |
3300 |
|
|
Designed product capacity (t/h) |
5283 |
|
|
Max. non-detachable component size (mm) |
Electric control part: 3270×1585×790 |
|
|
Max. non-detachable weight(KG) |
The ministry of electric control:11231; cutting part:15000; Bracket:7546 |
|
|
Weight (t) |
128 |
121 |
|
Corollary conveyer |
SGZ1000/1400; SGZ1000/1050 |
|
