- 1
Application
MG2X80/381-WD series coal shearer is available for the medium thick seam or top grade ordinary mining face, Cutting height range from 1.1~2.0m.
Performance and characteristic
Used in mining the coal seam of 1.1-2.15m
A high working rate, short, narrow and thin body give it a good adoption of thin coal seam.
Equipped with full protection and memory function.
The speed governing system is machine loaded engine.
To provide a bigger power to the cutting part, two engines are available.
The device can be operated both manually and remotely.
The working condition is monitored and the related parameter will be displayed in Chinese.
The communication of the electronic and hydraulic control system of the working face can be achieved( optional).
The piece-by-piece cutting and memory function can be achieved.(optional)
Parameter
|
Model |
MG2X80/381-WD |
|
Cutting height range( m) |
1.1~2.055(Ø1.1m roller) |
|
Cutting depth(m) |
0.63 |
|
Adapt dip angle (°) |
≤35 |
|
Roll drum diameter (m) |
Ø1.1; Ø1.2; Ø1.3 |
|
Roll drum speed (r/min) |
58.57 |
|
Length of rocker (mm) |
1872.2 |
|
Rocker arm swinging centre distance (mm) |
5800 |
|
Traction force (kN) |
345 |
|
Traction speed (m/min) |
0~7.1 |
|
Traction mode |
Pin gear row of electric traction (AC)without chain |
|
Machine height (mm) |
730 |
|
Minimum dinting capacity (mm) |
235.5(Ø1.1 roller) |
|
Dust suppression mode |
Inside and outside spraying |
|
Installed power( KW) |
2×2×80+2×25+11=381 |
|
Voltage (V) |
1140 |
|
Designed product capacity (t/h) |
717 |
|
Max. non-detachable component size (mm) |
2453×1200×615 |
|
Max. non-detachable component weight (kg) |
4600 |
|
Weight (t) |
24 |
|
Corollary conveyer |
SGZ630/150; SGB630/150 |
