- 1
Application
MG2×125/580-WD series coal shearer is suitable for thin coal seam mechanized mining face, Cutting height range from1.2~2.58m.
Performance and characteristic
Used in mining the coal seam of 1.2-2.58m
The speed regulator is located on the device and the device walks on the trail.
The working condition of the device is monitored and will be displayed in Chinese.
Full protection and memory function are equipped.
The device can be operated both manually and remotely.
The working rate of the cutting is raised by using double engine.
Parameter
|
Model |
MG2×125/580-WD |
MG2×100/480-WD |
MG2×150/700-WD1 |
|
Cutting height range( m) |
1.2~2.58(Ø1.4 roller) |
||
|
Cutting depth(m) |
0.63; 0.8 |
||
|
Adapt dip angle (°) |
≤55 |
||
|
Roll drum diameter (m) |
Ø1.15; Ø1.25; Ø1.4 |
||
|
Roll drum speed (r/min) |
56.7; 65.3 |
||
|
Length of rocker (mm) |
2111 |
||
|
Rocker arm swinging centre distance (mm) |
5600; 6250 |
||
|
Traction force (kN) |
420(515; 345) |
420;(515; 345) |
550(690; 450) |
|
Traction speed (m/min) |
0~7.4(0~5.9; 0~9) |
||
|
Traction mode |
Electric traction (AC) without chain |
||
|
Machine height (mm) |
830~970 |
||
|
Minimum dinting capacity (mm) |
164(Ø1.15 roller); 235(Ø1.25 roller); 310(Ø1.4 roller) |
||
|
Dust suppression mode |
Inside and outside spraying |
||
|
Installed power (KW) |
2×2×125+2×30+20 |
2×2×100+2×30+20 |
2×2×150+2×40+20 |
|
Voltage (V) |
1140 |
||
|
Designed product capacity (t/h) |
1449 |
||
|
Max. non-detachable component size (mm) |
2650×1380×600 |
||
|
Max. non-detachable component weight (kg) |
4625 |
||
|
Weight (t) |
30 |
||
|
Corollary conveyer |
SGZ730/400; SGZ764/400 |
||
